TRKiNETROL TURKEY
Kinetrol® I/P Controller
The optional Kinetrol I/P Controller is mounted in place of the standard diaphragm housing on the side of the AP positioner case. The AP positioner can still be mounted in any orientation and gives an angular output position which is proportional to the input current control signal between 4-20mA.
English 924 kb .PDFSpecifications
Electrical Control Signal: 4-20mA
Coil Impedance: 20 ohms typical
Cable Entry: 16mm conduit or gland (mini DIN plug, IP 65 with Pg9 cable gland, 6-8mm dia optional)
Air Supply: 80 psi/5.5 bar nominal
Air Entry: G1/8 (fitted with 6mm pipe dia. push in connector
Linearity: 1.5%*
Hysteresis: less than 1%*
Sensitivity/Deadband: less than 1%*
Supply Pressure Influence: 0.2% per psi between 80 and 60 psi
Quiescent Air Consumption: 3.5 l/min free air max
Working Temperature Range: -20°C to +80°C
Instrument quality dry, clean air obligatory (Class 6.4.4 ISO8573.2001)
* These refer to the combination of Kinetrol actuator with I/P controller – not just the positioner performance
Delivery Details
Net Weight: 1,20 kg
Package Dimension: 10x10x12 cm
Commodity Code: 8479.90.00.10.00
Country of Origin: United Kingdom
Documents
Kinetrol I/P Controller Datasheet