Category Archives: Technic Blog and Articles

What is Solenoid Valve? Solenoid Valve Types and Usage Areas

mor endustri logo

What is Solenoid Valve? Solenoid Valve Types and Usage Areas A solenoid valve can be briefly defined as a valve that opens and closes with an electrical signal. A solenoid valve is a valve used for fluids such as air, gas, oil, water, and water vapor. A solenoid valve is produced to control these fluids,

Pneumatic Systems and Their History

mor endustri logo

Pneumatic Systems and Their History Pneumatic systems date back to 2500 BC. The pneumatic system used in these years was called an air blower. The pneumatic system has also started to be used in the mining sector. The pneumatic system is derived from the word Pneuma, which means wind in ancient Greek. On the one

How Does a Solenoid Valve Work?

mor endustri logo

How Does a Solenoid Valve Work? Pressure is applied to the diaphragm with the help of spring with the iron core inside the coil, which is one of the auxiliary elements of the solenoid valve. This iron core is also called a valve piston. When the current given to the solenoid valve moves towards the

What is the Positioner?

mor endustri logo

What is the Positioner? The positioner applies air pressure to determine whether the valve is in the correct position. This positioner is mounted on actuators. Positioners evaluate the control signal coming to the valves and bring the valve to the opening percentage. It is not possible to determine whether the valve is in the desired

What should be considered when buying a dosing valve?

pnomatikaktuatorTeknikBlog

Different products are preferred according to the usage capacity and efficiency of such systems, which are generally preferred according to their usage areas. Recently, it seems that such systems are preferred in the selection process with different characteristics. At the same time, depending on the characteristics of the places of use, the frequent use of

Why Is Flow Control Gate Preferred By?

pnomatikaktuatorTeknikBlog

In various industrial areas and enterprises where material flow is provided, these kinds of are used in order to control the flow proportionally. According to the produced drive system or drum system, it is possible to use different valves. Especially in order to quickly fulfill the industrial goals needed recently, these kinds of products are

What is an Air Slide?

pnomatikaktuatorTeknikBlog

Air slide is used in the transport of products such as lime, cement and ash along with pneumatic transport techniques. It consists of two different parts: porous air tape cloth and separated air slide. Low-pressure air is fed, and this quality of the lower section also provides convenience in the areas of use.  Especially in

Air Slide Production

pnomatikaktuatorTeknikBlog

Air slide is used to transport products such as cement, aluminum, gypsum and fly ash powder for various purposes. The air slide system consists of two systems separated by an airband cloth. Tape systems have a certain capacity. This capacity is achieved through carrier equipment and chassis. It has a sealed body and has a

Sampler

Teknik Blog numunealicisi

In industrial plants and companies, the systems are used for sampling raw materials with a powder and granular structure at certain time intervals are called samplers. According to the physical properties of the substance to be sampled, conveyor belt or air belt pouring systems are applied. The physical and chemical properties of the substance to

What is a Sampler and what does it do?

pnomatikaktuatorTeknikBlog

Thanks to the wide range of possibilities provided by technology, it is a convenient device that allows taking samples from granular floors (sand and pebble-weighted grounds) without disturbing, unchanged texture, the natural conditions of the land, on the land to be used for industrial purposes. The sampler is used by the manufacturer and persons at